Troubleshooting - Mercedes-Benz SL 2008 Owner's Manual

Practical advice

Troubleshooting

Troubleshooting
Points to remember
G Risk of accident and injury
The operating safety of your vehicle could be compromised if service work is carried out improperly. You could lose control of the vehicle,
thereby causing an accident. Safety systems may also not be able to protect you or others as intended.
Always have maintenance work carried out at a qualified specialist workshop which has the necessary specialist knowledge and tools to
carry out the work required.
Mercedes-Benz recommends that you use a Mercedes-Benz Service Centre for this purpose.
In particular, work relevant to safety or on safety-related systems must be carried out at a qualified specialist workshop.
Indicator and warning lamps in switches and buttons
Problem
One or all of the indicator lamps
in the seat ventilation* button are
flashing.
One or all of the indicator lamps
in the seat heating* button are
flashing.
230
Possible cause/consequence
There is insufficient voltage
because too many consumers are
switched on. The seat ventila-
tion* has switched itself off auto-
matically.
There is insufficient voltage
because too many consumers are
switched on. The seat heating*
has switched itself off automati-
cally.
Suggested solutions
Switch off consumers that are not required, e.g. reading lamps,
X
interior lighting, etc.
The seat ventilation* will automatically switch back on as soon as
there is sufficient voltage again.
Switch off consumers that are not required, e.g. reading lamps,
X
interior lighting, etc.
The seat heating* will automatically switch back on as soon as
there is sufficient voltage again.
* optional