Mercedes-Benz SL 2008 Owner's Manual page 126

Calling up the range
Using è or ·, select From start.
X
Press the j or k button to select
X
Range:.
The multi-function display shows the esti-
mated distance that can be covered by the
vehicle, based on your current driving style
and the amount of fuel remaining in the
tank.
If there is only a small amount of fuel left in
the fuel tank, the display shows a vehicle
being refuelled ¿ instead of the range.
Telephone menu*
Functions and displays depend on the
optional equipment installed in your vehicle.
You can place your mobile phone in the
mobile phone cradle* ( page 166), or set up
Y
a Bluetooth connection to COMAND; see the
separate operating instructions.
G Risk of accident
Observe the legal requirements of the
country in which you are currently driving
regarding the use of mobile phones in the
vehicle.
* optional
If it is permitted to use mobile phones while
the vehicle is in motion, you should only use
them when the road and traffic conditions
allow. You may otherwise be distracted
from the traffic conditions, cause an acci-
dent and injure yourself and others.
i
Menu overview: see ( page 109).
Y
Use the buttons on the multi-function steer-
ing wheel.
Switch on the mobile phone and COMAND;
X
see the separate operating instructions.
Press the è or · button to select the
X
Telephone menu.
Mobile phone on
PIN code not yet entered
Once you have inserted the mobile phone into
the mobile phone cradle*, the multi-function
display shows the message PIN.
Enter the PIN via the mobile phone, Lingua-
X
tronic* or COMAND.
The mobile phone will search for a network.
On-board computer
Mobile phone operational
The multi-function display shows the mes-
sage Ready or the name of the GSM network
provider. If the operational readiness symbol
goes out, your vehicle is outside the trans-
mission and reception range. In this case, the
message No service appears in the multi-
function display.
Accepting a call
If someone calls you while you are in the
Telephone menu, the following message
appears in the multi-function display:
Press the s button to accept the call.
X
Rejecting or ending a call
Press the t button.
X
Controls
Z
123