Table of Contents
Advertisement
Controls
Seats
Multi-contour seat*
You can set the contour of the seat to provide
optimum support for your back.
Shoulder region support
1
Backrest side cushions
2
Massage function (PULSE)
3
Lumbar region support
4
Make sure that the key is in position 2 in
X
the ignition lock.
Backrest contour in the lumbar region
Adjust the contour of the backrest in such a
way that the lumbar region of your back is
properly supported.
76
Press rocker switch
4
to
k
X
The air cushion to be set is selected.
Press rocker switch
4
to
æ
X
The selected cushion is inflated or deflated.
Backrest contour in the shoulder region
Adjust the contour of the backrest in such a
way that the shoulder region of your back is
properly supported.
Press switch
1
to
æ
or ç.
X
The cushion is inflated or deflated.
Lateral support of the backrest
Adjust the side cushions of the backrest in
such a way that you have good lateral sup-
port.
Press switch
2
to the left or right.
X
The lateral support is either increased or
reduced.
Massage function
The massage function helps you to prevent
muscle tension on long journeys.
or j.
Press button 3.
X
The indicator lamp in button
The air cushions in the lumbar region are
or ç.
inflated and then deflated.
i
After about eight minutes, the massage
function switches off automatically. The
indicator lamp goes out.
AIRSCARF neck-level heating*
The AIRSCARF neck-level heating function
blows warm air around the heads of car occu-
pants. The warm air flows out of the holes in
the head restraints.
G Risk of injury
When AIRSCARF is in operation, very hot air
can flow from the vents in the head
restraints. This could cause burns to bare
skin in the immediate vicinity of the vents.
Make sure that you reduce the heater out-
put in time.
The three red indicator lamps in the button
indicate the heating level you have selected.
3
comes on.
* optional
Advertisement
Chapters
Table of Contents
