Table of Contents
Advertisement
Display messages
P
Selector lever to P
No Service
Tyre pressure
displayed after
driving for a few
minutes
* optional
Possible cause/consequence
You have switched off the engine with the
KEYLESS GO button* and opened the driv-
er's door.
or
With SBC Hold activated, you have either:
opened the driver's door and released
R
the seat belt or
switched off the engine or
R
opened the bonnet
R
The horn may also sound at regular inter-
vals. The horn becomes louder if you
attempt to lock the vehicle.
The engine cannot be started.
Your vehicle is outside of the GSM net-
work provider transmitter/receiver range.
The tyre pressure monitor* is measuring
the tyre pressure.
Practical advice
Display messages
Possible solution
Move the selector lever to P.
X
The engine can be started again.
Wait until the operational readiness symbol
X
appears in the multi-function display
(
page 123).
Y
Drive on.
X
The tyre pressures will appear in the multi-
function display after you have been driving for
a few minutes.
Z
209
Advertisement
Chapters
Table of Contents
