Mercedes-Benz SL 2008 Owner's Manual page 122

Press è or · to select the Set-
X
tings menu.
Press the j button to select submenus.
X
Press the æ or ç button to select the
X
Lighting submenu.
Press the j button to select Headlamp
X
mode.
Press the æ or ç button to set the
X
switch-on mode for the headlamps to Man-
ual or Constant (constant headlamp
mode).
Press the j, è or ÿ
X
select a different display.
Switching the locator lighting on or off
If the locator lighting is switched on, the fol-
lowing lights will be switched on automati-
cally in the dark after you have unlocked the
vehicle using the key:
the side lamps
R
the tail lamps
R
the licence plate lighting
R
the front foglamps
R
The locator lighting switches off automati-
cally if you open the driver's door or after
40 seconds.
Press è or
X
tings menu.
Press the j
X
Press the æ
X
Lighting submenu.
Press the j
X
lighting.
Press the æ
X
Locator lighting on or off.
button to
Press the j,
X
select a different display.
Activating or deactivating the exterior
lighting delayed switch-off
Using the Headlamps delayed switch-
off function, you can set whether the exterior
lighting should remain on for 15 seconds after
the doors are closed when it is dark. If none
of the doors are opened after the engine is
switched off or if an open door is not closed,
the exterior lighting goes out after 60 sec-
onds.
· to select the Set-
button to select submenus.
or ç button to select the
button to select Locator
or ç to switch the
è or ÿ button to
On-board computer
When you have set a delayed switch-off time
and then switch off the engine, the following
remain lit:
the side lamps
R
the tail lamps
R
the licence plate lighting
R
the front foglamps
R
You can reactivate this function by opening a
door within 10 minutes.
Press è or · to select the Set-
X
tings menu.
Press the j button to select submenus.
X
Press æ or ç to select the Light-
X
ing submenu.
Press the j button to select Headlamps
X
delayed switch-off.
Press the æ or ç button to activate
X
or deactivate the Headlamps delayed
switch-off function.
Press the j, è or ÿ
X
select a different display.
To temporarily deactivate the delayed switch-
off:
Controls
button to
Z
119