Table of Contents
Advertisement
Controls
On-board computer
i
Menu overview: see (
page 109).
Y
Displaying messages
Use the buttons on the multi-function steer-
ing wheel.
Press the
è
or
·
button repeatedly
X
until either the original menu or the Mes-
sage memory menu appears.
If the Message memory menu does not
appear, there are no display messages.
If there are messages, the following mes-
sage may appear in the multi-function dis-
play, for example: 2 messages.
Use the
j
or
k
button to scroll
X
through the display messages.
116
Settings menu
There are two functions in the Settings
menu. You can use the To reset: Press
reset button for 3 seconds function to
restore most settings to factory settings. You
can also use the submenus here to make indi-
vidual settings for your vehicle.
i
Menu overview: see (
page 109).
Y
Use the buttons on the multi-function steer-
ing wheel.
Resetting to factory settings
For safety reasons, not all functions are reset:
permanent Speedtronic can only be set in the
Vehicle submenu. The Headlamp mode
function in the Lighting submenu is only
reset if the vehicle is stationary.
Press the
è
or
·
button to select the
X
Settings menu.
Press and hold the reset button on the
X
instrument cluster for approximately three
seconds.
A prompt appears in the multi-function dis-
play asking you to press the reset button
again to confirm.
Press the reset button again.
X
The functions of most submenus are
restored to factory settings.
or
If you want to retain the settings, do not
X
press the reset button a second time.
The Settings menu appears again after
approximately 5 seconds.
Press the
è
or
·
button to select a
X
different menu.
Submenus in the Settings menu
Press
è
or
·
to select the Set-
X
tings menu.
Press the
j
button to select submenus.
X
A list of submenus is displayed. More sub-
menus are available than can be displayed
at a time.
Advertisement
Chapters
Table of Contents
