ABB ACH580-31 Hardware Manual page 28

28 Introduction to the manual
Term
DPMP-EXT
Drive
EFB
EMC
FBIP-21
FCAN
FCNA-01
FDNA-01
FECA-01
FENA-21
FEPL-02
FLON-01
FPBA-01
Frame, frame size
IGBT
Intermediate circuit
Inverter
Line-side converter
LonWorks®
Motor-side converter
NETA-21
Network control
Parameter
PLC
PTC
Rectifier
STO
Description
Optional mounting platform for door mounting of control panel
Frequency converter for controlling AC motors
Embedded fieldbus
Electromagnetic compatibility
BACnet/IP adapter module
Optional CANopen® adapter module
Optional ControlNet™ adapter module
Optional DeviceNet™ adapter module
Optional EtherCAT® adapter module
Optional Ethernet adapter module for EtherNet/IP™, Modbus TCP
and PROFINET IO protocols, 2-port
Optional Ethernet POWERLINK adapter module
Optional LonWorks® adapter module
Optional PROFIBUS DP® adapter module
Physical size of the drive or power module
Insulated gate bipolar transistor
DC circuit between rectifier and inverter
Converts direct current and voltage to alternating current and
voltage.
Rectifies three phase AC current to direct current for the intermediate
DC link of the drive
A networking platform
Converts intermediate DC link current to AC current for the motor
Remote monitoring tool
With fieldbus protocols based on the Common Industrial Protocol
(CIPTM), such as DeviceNet and Ethernet/IP, denotes the control of
the drive using the Net Ctrl and Net Ref objects of the ODVA AC/DC
Drive Profile. For more information, see www.odva.org.
In the drive control program, user-adjustable operation instruction
to the drive, or signal measured or calculated by the drive.
In some (for example fieldbus) contexts, a value that can be accessed
as an object. For example, variable, constant, or signal.
Programmable logic controller
Positive temperature coefficient
Converts alternating current and voltage to direct current and voltage
Safe torque off (IEC/EN 61800-5-2)