Elastic Clip Control - Benelli BN600R 2014 Service Station Manual

The following procedure applies to all elastic clips (1)
Check:
• for the absence of lines and stress traces on each clip Fig.
A.
If outside specifi cation, replace the relevant clips and pistons.
NOTE
Before measuring side clearance between the piston clips, re-
move any carbon deposits from the piston clips and grooves.
Measure:
• The side clearance between a piston clip and another, using
a thickness gauge Fig. B.
If outside specifi cations, replace the piston and the relevant clips
all together.
Clip
Top clips
Clips
Measure:
• The thickness of the top clip.
• The thickness of the second clip.
See Fig. C
Clip
Top clips
Clips
All manuals and user guides at all-guides.com
PISTONS

ELASTIC CLIP CONTROL

Piston clip side clearance.
0.04÷0.08 mm
0.05÷0.09 mm
Piston clip thickness
0.8 -0.01/-0.03 mm
0.8 -0.02/-0.04 mm
- 197 -
ENG
A
B
C