Check/Replacement Of Wheel Bearings - Benelli BN600R 2014 Service Station Manual

Check:
• Wheel bearings
If the front wheel turns irregularly or is loose, replace the wheel
bearings.
Replace:
• Wheel bearings
Remove the bearings from the wheel "A" with a generic bearing
extractor Fig.B.
Fit the new wheel bearing, following the removal steps in rever-
se order.
IMPORTANT NOTICE
During the bearing insertion, do not touch the inner seat "B" or
the ball bearings of the wheel "C". Contact must only occur with
the outer seat of bearing "D" Fig. C.
NOTE
Use a wrench that is adapted to the diameter of the outer edge
"E" of the wheel bearing, Fig.C.
All manuals and user guides at all-guides.com
REAR WHEEL AND BRAKE DISC

CHECK/REPLACEMENT OF WHEEL BEARINGS

- 93 -
CHAS
A
B
A
C
E
D
C
B