Benelli BN600R 2014 Service Station Manual page 164

Assemble:
• The rubber gasket (4) to the fuel tank (5)
• Apply the opening (3) over the gasket (4)
• Tighten the safety screw (1) and lock the opening.
• Tighten the lock in the opening (3) using the three longer
fastening screws (2) Fig. A.
NOTE
The screws (1) fi tted to the outside of the lock are only fi tted for
visual effect.
Removal:
• carry out the installation steps in reverse order.
All manuals and user guides at all-guides.com
FAIRING
TANK CAP FITTING
FAIRING
TANK CAP REMOVAL
- 163 -
CHAS
A
2