Removal:
NOTE
Drain out the brake fl uid before proceeding with these opera-
tions.
Follow the disassembly sequence shown below:
•
Remove the Idrostop (8) and the relevant gaskets (7).
•
Take out the rear brake hose (1).
•
Remove the fastening screws (x) from the brake pump Fig.
A.
•
Remove the nut and the fastening screw (y) Fig.B and free
the ball joint (Z) from the brake control lever.
•
Take out the brake pump(6).
IMPORTANT NOTICE
During the disassembly stage, do not allow any brake fl uid re-
maining in the circuit to drip onto the vehicle surfaces.
All manuals and user guides at all-guides.com
FRONT AND REAR BRAKES
REAR BRAKE PUMP REMOVAL
- 101 -
CHAS
X
Z
Y
A
B