Advertisement
(
,--7
IV.EXPOSURE SYSTEM
A.
1.
:;
3)
4)
,--.i
\
ixposure
Assembly
Detaching the Scanning
Lamp
Disconnect the power plug.
Detach the copyboard
glass.
Remove the two screws 0, and detach
the anti-glare plate 0.
Figure 4-400
Push the lamp terminal plate (rear) @
into the direction
of the arrow,
and
detach the scanning lamp 0.
Figure 4-401
2.
Detaching the Thermal Fuse
1)
Detach
the control
panel
and
the
copyboard
glass.
2)
Hold the rear of the No. 1 mirror mount
0,
and move it to the right until it is
positioned
as shown in Figure 4-402.
3)
Remove the two screws 0, and detach
the thermal fuse 0.
Figure 4-402
Advertisement
