Advertisement
4.
MECHANICAL SYSTEM -
1)
2)
3)
4)
5)
Release the feeder assembly.
Detach the main motor assembly;
see
p.4-10.
Remove
the E-ring 0,
and detach the
bushing @_
Figure 4-316 (rear)
Detach
the inside cover,
and remove
the E-ring 0;
then, detach the bushing
@I.
Detach
the grounding
wire (1 screw)
0.
Figure 4-317
6)
Hold the side of the feeder assembly @
and pull it out toward the front slowly as
if to lift it.
2.
1)
2)
Figure 4-318
Feeder Belt
Detach the feeder assembly.
Remove the two screws 0, and detach
the rail cover @ found at the front.
Figure 4-319
Advertisement
