Advertisement
-
5. INSTAUATION
C. Checking the Operation
Step
Work
Remarks
1
Turn the door switch ON using the
door switch actuator.
2
Connect the power plug, and shift the
Check that the ADD PAPER and
POWER switch to 'ON'.
CASSETTE
OUT indicators go ON and
the WAIT indicator lights red.
3
Set the cassette size to suit the needs
See p. 5-9.
of the user.
4
Put copy paper in the cassette, and
*
Check that the ADD PAPER indicator
set the cassette in the copier.
goes OFF.
-
Press the keys, except the COPY
START key, on the control panel, and
check that each operation is correct.
5
Set the copy tray on the copier.
6
Open the copyboard
cover, and
remove the paper and the protection
seal from the document size plate.
7
Record the reading of the copy counter.
8
Make a copy after the COPY START
Check the following:
key has gone green.
* No abnormal sound is heard; and
Wait for ten seconds or more after the
*
The ADD TONER indicator flashes
drum has stopped, and make another
about five to ten seconds after the
copy.
second copy operation is over.
9
Check that the counter operates
Check that the reading has increased by
properly.
two from the reading recorded in step 7.
Advertisement
