8.
Position
of Paper Guide
The position
of the paper
guide
is
adjusted by the paper guide mount. For this
reason, the position of the paper guide need
not be adjusted.
- .,
: vote:
;
i
:
"
',,>
";,' ','
(If the paper guide mount has been
'
I
,
detached,
the position of the pap&guide'
I
:
must; be adiusted.
To avoid this, do not
,,Jqqsen the
screws on the paper-guide;'if
I
,neci+safy, mark the
position on the,fixihg
"
'$&emt$y'mount
using a scriber.~
"3
I,
,"j
lo adjust the position of the paper guide,
place ths
fixing assembly on a desk;&d
move the
paper guide so that the position
is aq shown
in Figure 4-719.
,, "
el;
: 3' I
Figure 4-719
9.
Detaching
the Upper Separation
Claw
1)
Open the delivery assembly.
2)
Mark
the
position
of
the
upper
separation
claw
retainer
using
a
scriber.
3)
Remove the three mounting
screws 0,
and remove the upper separation
claw
retainer 0;
be careful with the delivery
detection lever @ at the time.
Figure 4-720
4)
Remove
the spring,
and detach
the
upper separation
claw.