Advertisement
10. Attaching the Upper Separation
Claw
Attach
the upper
separation
claw as
detaching
it but in reverse
order with the
following in mind.
a.
Make sure that the boss on the upper
separation
claw is in contact
with the
mount as shown in Figure 4-721.
11.
Detaching the Lower Separation
Claw
,r.
1)
Open the delivery unit.
2)
Slide the lower separation
guide plate
@ to remove.
Figure 4-721
Figure 4-723
b.
Make sure that the upper
separation
claw assembly
is fully toward the rear.
If a scratch is noted on the upper fixing
roller, move the upper separation
claw
assembly about 4 mm toward the front.
3)
12.
Remove
the spring,
and remove
the
lower separation
claw.
Mounting
the Oil Application
Solenoid
Screw
the oil application
solenoid
in
place where its lever is lightly in contact with
the support of the oil application
roller.
-_I
J-4mn
Figure 4-722
ct
Figure 4-724
Advertisement
