Advertisement
B
5. INSTALLATION
II. UNPACKING AND INSTALLING THE COPIER
/"_
When a piece of metal is moved from a cold place to a warm place, droplets of water form
'L
on its surface.
This phenomenon
is known as condensation
and affects the performance
of
machines,
The simplest way to eliminate
condensation
in the copier, any machines
for that
matter, is to leave it alone until it warms to room temperature
(at least one hour)
A. Unpacking
Step
Work
1
Open the coardboard
packing case of
the copier and take out the box of
accessories.
2
Cut open the widest side of the packing
case, avoiding the corner, containing the
metal staplara.
Remarks
3
Open up the side of the packing case
completely,
and slide out the copier onto
this side. Remove the two polystyrene
shells from the copier.
,-
._I
Advertisement
