Advertisement
,
8)
Attach the grounding wire @for Control
,.-.\
Card V.
I
9)
10)
Figure 5-25
Disconnect
the shorting connector 0 of
the control panel shown in Figure 5-26.
Connect the 4P connector @ of Control
Card V and the 4P connector
of the
control panel on the copier side.
Figure 5-26
11)
12)
13)
14)
15)
Mount the control panel on the copier.
Remove
the protection
sheet from the
control
panel
guide
plate
of Control
Card V.
Attach the control panel guide plate @
of Control Card V on the control panel
of the copier.
Figure 5-27
Turn the copier
ON, and check
the
operation of Control Card V.
Attach the inside right cover.
Advertisement
