Advertisement
-
1. GENERAL DESCRIPTION
IKOPERATION
A. Control Panel
Figure
l-4
SORT/GROUP/STAPLE SORT key
Press it to select the sort group, staple sort
or non-sort
mode. The indicator remains
unlit when the non-sort mode is selected.
*
sorting
z-
grouping
0
staplesorting
PAGE OPERATlON key
Press it to seled the page separation mode.
JAM indicator
CONTROL CARD indcator
ADD PAPER indicator
ADD TONER in&&r
COPY COUNT/RATIO indiitor
It indiites
the reproc+Jdon ratio when the %
key is pressed.
COPY START key
-
glows orange when the copier is not ready
for copying.
- gk3ws green when the copier is ready for
copying.
RESET key
Press it to reset the copier to its default
settings.
Default Settings
*
copy
count 1
-
DIRECT
-
AE (may be turned OFF using 'C15' of
service mode)
CLEARSTOP key
STANDBY key
POWER switch
POWER indicator
The indicator remains ON while the power is
on.
Numeric keypad
% key
Press it to check the reproduction ratio on the
copy count indicator.
The display changes to the copy count 2 set
after the key is released.
ZOOM key
Press it to select a desired reproduction ratio
between 50% and 200% in 1% increments.
AUTO RATIO key
Press it to select or deselect
the auto
'
reproduction ratio mode.
The key is effective
when the ADF is
attached.
PAPER SELECT/JAM indicator
,A LED goes ON to indicate the locatin of
the paper or flashes to indicate the location of
the jam, if any.
PAPER SELECT key
Press it to select automatic paper selection
(may be turned OFF using 'CO7 of service
mode) or cassette or multifeeder
as the
source of paper.
ENLARGE key
DIRECT key
REDUCE key
' -.
AE (automatic exposure; density adjusbnent)
key
COPY DENSITY lever
Advertisement
