Verifying The Gateway Connections - Honeywell HON-CGW-MBB Installation And User Manual

Verifying the Gateway Connections

5.2 Verifying the Gateway Connections
While configuring the gateway, confirm that the LEDs indicate successful connections as
shown in Figure
If the LED is indicating differently, refer to
necessary, refer to the
Honeywell Technical Support.
LED Indicator
Power-Indicating LED
DL1
DL2
DL6
DL3
DL4
a FLASHING FAST = 0.2 second ON and 0.2 second OFF
b FLASHING SLOW = 1 second ON and 1 second OFF
CLSS Gateway - Installation and Users' Manual | P/N:LS10248-000HW-E | REV. F | FEB/11/2022
5.3.
6.2, "Troubleshooting"
State
ON
ON
OFF
OFF
a
Flashing fast
Flashing slow
OFF
ON
Flashing fast
Flashing slow
Flashing slow
Flashing fast
Table 2.2 to know the operational status. If
section to fix the problem or contact
Successful power connection
ON - The cellular module is installed and
receiving power.
OFF - The cellular module is not installed.
There are no issues
Successful mobile connection
Ready for connection
b
Disabled mobile connection
The gateway is in the configuration mode
The gateway is getting the inventory data
The gateway is communicating with the panel
The gateway is communicating with CLSS Site
Manager
The gateway has the Internet connectivity, but not
the CLSS Site Manager connectivity
Configurations
Meaning
32