Honeywell HON-CGW-MBB Installation And User Manual page 134

Gent Panels
1. On the Gateway Side
1. Connect the RS-232 cable to the RS-232 port of the gateway.
The RS-232 port is labeled as 6 in the
2. On the Panel Side
1. Inside the panel enclosure, find the backplane PCB board.
2. Insert the I/O card into the P2 Card 15.
For the P2 Card 15-Connected I/O Card:
1. In the panel, find the RS-485/RS-232 (P4) connectors on the main control board.
2. Connect the RS-232 cable to the Tx (Brown), Rx (White), and 0V (Green) terminals
of the RS-485/RS-232 (P4) connectors.
CLSS Gateway - Installation and Users' Manual | P/N:LS10248-000HW-E | REV. F | FEB/11/2022
Figure C.20: Vigilon Panels: I/O Card Connection
Figure C.2.
Connecting to the Panels
133