Remote Access Gateway (Rfg100) - Honeywell evohome Installation Manual

P18

Remote Access Gateway (RFG100)

!
If the Gateway was in the
Connected Pack with
evohome, it is already
bound and there is no
need follow these binding
instructions.
Central
Controller
If you are NOT following
GUIDED CONFIGURATION
follow these steps on your
Central Controller display
first:
1. Press and hold
"Settings" for 3
seconds
2. Press the green tick
3. Select ADD GATEWAY
Step 3: Power up and bind devices
Power up and bind a Remote Access
Gateway (RFG100)
Connect the Gateway to the power
supply and turn on the power.
To bind the Remote Access
Gateway (RFG100)
Press and hold the button on the
1
base of the gateway unit until you see
a flashing light next to the
On the Central Controller press
2
the green bind button
You should receive a SUCCESS message on the
3
Central Controller (if not go back and re-bind)
Now you need to set up a user account
and download the smartphone app.
Go to www.mytotalconnectcomfort.com and follow
the instructions there.
1