2: Led Indicators - Honeywell HON-CGW-MBB Installation And User Manual

Gateway Board Layout
2.3.2 LED Indicators
The LED indicators on the gateway board use different colors to identify the operational
status of the gateway. To know the location of the LED indicators on the gateway board,
refer to
Figure 2.1, "Printed Circuit Board: Layout"
Power-Indicating LED
SOM
Indicates the gateway board's received power status. See "Power Indicator" in
Figure 2.1
ON The circuit board is receiving 24V power from its power source.
OFF The circuit board is not receiving power.
LTE Power LED
DL1
Indicates the power supply status for cellular communications
ON The LTE radio device is receiving power from the circuit board.
OFF The LTE radio device is not receiving power.
Trouble LED
DL2
Indicates the gateway's operational status
OFF There are no issues.
FLASHING SLOW (flashes once per 1 second) There are communication
issues with the panel or the Internet connectivity.
ON There is a critical error in the system.
To fix the issues, you can refer to the
discusses about some possible issues and their solutions.
Mobile Connectivity LED
DL6
Indicates the status of mobile communications between the gateway and the
CLSS App.
FLASHING SLOW (flashes once per 1 second) The gateway is connected
to the CLSS App.
FLASHING FAST (flashes once per 0.25 second) The gateway is ready for
the CLSS App connection.
OFF The mobile connectivity is disabled.
CLSS Gateway - Installation and Users' Manual | P/N:LS10248-000HW-E | REV. F | FEB/11/2022
Figure 2.2: The LED Indicators on the Gateway
Table 2.2: LED Indicators and Their Messages
.
.
6.2, "Troubleshooting"
Overview
section, which
16