Remaining Risks; Use Of The Machine - Ecotech Italia 60 Series User And Maintenance Manual

WARNING!!! The machine has blades, therefore keep your hands and feet away from it and never perform
any operations on the machine while the engine is on.
It is advisable not to work in areas where gravel, rocks and foreign bodies are present, which may be thrown by the moving
blades, resulting in great danger for nearby people or things. Keep people at a distance of at least 15 metres from the machine.
The operator must wear a protection mask and possibly rubber boots.
WARNING!!! Do not put your hands close to the oscillation mechanism on the machine for any reason; this
mechanism may crush your fingers.
RESPECTING THESE NORMS IS NOT A WASTE OF TIME!
THEY ARE USEFUL TO PREVENT IRREVERSIBLE DAMAGE TO PEOPLE OR THINGS AND GUARANTEE THE
OPERATOR'S SAFETY.
5.6

REMAINING RISKS

Noise: always wear ear protection devices.
It is recommendable to make some pauses during work. Do not use the machine for more than 8 hours a day.
6

USE OF THE MACHINE

Dear Customer, thank you for trusting ECOTECH ITALIA Srl, we are confident that your new machine will fully meet your
requirements.
In order to optimize the use of the machine and perform maintenance operations efficiently in the long run, please read all the
instructions and warnings described in this manual, which you should always keep with the machine.
BEFORE STARTING THE MACHINE; READ THE INSTRUCTIONS CAREFULLY!
6.1 ADJUSTMENTS
Adjustment
Model Cutting height
BT 60 With a 13 socket wrench, remove the screw under
the cup (Fig. 6.1), move one or both the blocks
from the higher part of the plate to the lower part
of it (fig. 6.2), then screw everything in again and
tighten screws firmly.
DCS 60
.
Figure 6-1: cutting head
Figure 5-2: Sticker on the machine
Speed
Stable speed 1.6
km/h
Not applicable (push
model)
Turning Engine
Exert a certain pressure See the engine instruction manual.
on the handle to turn
right or left.