General Information; Declaration Of Compliance - Ecotech Italia 60 Series User And Maintenance Manual

The units of measurements used are the ones envisaged by the International System (IS).
2

GENERAL INFORMATION

2.1 PRODUCER'S IDENTIFICATION DATA
ECOTECH ITALIA s.r.l. Via Copernico 85 – 47122 Forlì (FC) - Italy
Tel. 0039 (0)543 774314 Fax. 0039 (0)543 778658 E-mail.
POST-SALE/SPARE PARTS SERVICE:
authorized Suppliers or Customer Care Centres: see list at www.ecotechitalia.com.
2.2 IDENTIFICATION DATA AND MACHINE REGISTRATION NUMBER
Each machine is identified by means of an EC plate reporting its reference data in an indelible way.
In any message to the producer or its customer care centres, always quote these references.
The position of the plate on the machine may differ on each single unit.
2.3 DECLARATIONS
This machine was made in compliance with the relevant European Union Directives applicable at the time it was marketed.
2.3.1

Declaration of compliance

THE PRODUCER:
ECOTECH ITALIA via Copernico, 85 47122 Forlì FC - ITALY states, under its exclusive responsibility, that the product:
60 series – Model: BT 60, DCS 60, DCS 60 Traction, MC 60, TRL 60, TRT 60
Type:
Is in accordance with:
• European Regulation 2006/42/EC and with the relevant national provisions;
• European Regulation 2000/14/EC and subsequent amendments, relating to the noise emission in the environment by equipment for use outdoors.
Conformity assessment was performed according the procedure laid in Annex VI of European Regulation no. 2000/14/EC.
Notified Body no. 1282: Ente Certificazione Macchine S.r.L. - via Cà Bella 243, 40053 Loc. Castello di Serravalle – Valsamoggia (BO) - ITALIA.
The person authorized to compile the Technical Construction File is Mr. Roberto Romboli at ECOTECH ITALIA S.r.l. via Copernico, 85 47122 Forlì FC –
ITALY. The Technical Construction File required 2006/42/EC Directive is maintained at the corporate headquarters.
All of the instructions, as per the owner manual supplied with the machine, must be followed as well as all of the safety and accident prevention
standards in force in the Country of use. The machine bears the CE Mark.
Date:
02/01/2017
Table 2-1: Excerpt from the declaration of compliance
info@ecotechitalia.com
Figura 2-1: EC plates
DECLARATION OF COMPLIANCE
(Encl. II-A Dir. 2006/42/EC)
60 series
Year of production:
Signature:
2017