Back Panel Removal - GE RTfino/RT3200 Service Manual

GE MEDICAL SYSTEMS
REV 21
SECTION (B) Installation of the French ROM
4. Remove the BACK PANEL to access the MST board. Refer to illustration 3–27.
4–1. Remove the six rubber caps.
4–2. Unscrew the six screws from the back panel of the RT–x200.
4–3. Remove the back panel from the console.
5. MST Board
5–1. Remove the MST Board (A3) from the card cage and confirm that the MST Board # is in the list below:
5–2. Remove the English ROM(s) at the location(s) listed in step 5–3.
5–3. Install the French ROM(s) in the following location(s) identified in the Table. Refer to illustration 3–28.
MST Board #
P9514XJ-02
P9514XJ-03
P9514XJ-04
P9514XJ-05
P9514XH-02
P9514ZZ–00
2113953
RTfino/RT3200 Advantage–II/RT–x200 SERVICE MANUAL
SCREWS

BACK PANEL REMOVAL

ILLUSTRATION 3–27
CAUTION
Be sure the EPROM pins are straight before installation!
Be very careful to straighten pins if necessary.
Location English ROM Part #
U9A P9514PD-01
U9A P9514PD-02
U11A P9514PE-02
U9A P9514PD-03
U11A P9514PE-03
U9A P9514PT-02
U11A P9514PU-02
U9A P9514NW–00
U11A P9514NX–00
U9A 2113967–3
U11A 2113968–3
BACK PANEL
SCREWS
French ROM Part #
P9514PF-01
P9514PF-02
P9514PL-02
P9514PF-03
P9514PL-03
P9514PV-02
P9514PW-02
P9514QT-00
P9514QU–00
2113969–3
2113970–3
3–37
INSTALLATION AND REPLACEMENT
P9030GX