Placement And Adjustment Of The Monitor - Advantech PAX-327-C2 Series User Manual

4.6.5

Placement and Adjustment of the Monitor

For optimum performance, a one hour warm-up time is recommended.

Adjust the monitor height so that the top of the screen is at or slightly below eye

level. Your eyes should look slightly downward when viewing the middle of the
screen.
Rest your eyes periodically by focusing on an object farther away and blinking

often.
Position the monitor at a 90 degree angle to windows and other light sources to

minimize glare and reflections. Adjust the monitor tilt so that ceiling lights do not
reflect on the screen.
Use an anti-glare filter to improve viewing in the presence of reflected light.

Use a lint-free, non-abrasive cloth for cleaning the surface of the LCD monitor.

Do not use any cleaning solution or glass cleaner.
Adjust the monitor's brightness and contrast setting to enhance readability.

Avoid displaying fixed patterns on the monitor for long periods of time to avoid

image persistence (residual image).
Note! For optimal viewing, maintaining a 20-inch distance from the screen is
recommended.
Note!
This device generally does not require the user to install software. Any
modification of the internal firmware must only be done following specific
procedure provided by Advantech.
Note! The configuration of the device should mainly be done by the user using
the provided hardware keypad.
Note! If software tools are provided by Advantech they should be operated
using the specific instructions provided. Any software tools provided
should only be installed on a computer with appropriate systems to pre-
vent unauthorized access. It is recommended to install anti-virus soft-
ware and not connect to unsafe external networks.
Note! In case of any serious incident that has occurred, please contact the
manufacturer and the authorities immediately.
PAX-327-C2 User Manual 38