D9. Backtacking (Reverse Feed, Closing Up) - Garudan GZ-5525 Series User's Manual And Spare Parts Book

© ANITA

D9. BACKTACKING (REVERSE FEED, CLOSING UP)

Backtacking with hand lever [applies to manually controlled subclasses: GZ-5525-443]
Press the lever ① downwards. The machine will feed in the reverse direction until you release the
lever.
Backtacking with a micro switch [applies to automatically controlled subclasses: GZ-5525-447]
Push the micro switch ②. The machines will backtacking until you release the grip.
Automatic backtacking
On machines equipped with the positioning motor and automatic control the automatic backtacking
can be pre-selected with a pre-selected number of reverse stitches both at the beginning and at the
end of the seam. At the beginning of the seam (after previous thread trimming) after the pedal
treading forwards the machine will sew the pre-selected bar and continue the sewing. At the end of
the seam it will sew the pre-selected bar at the pedal treading in position -2.
16 GZ-5525 series MP04600EN_220920