Garudan GZ-5527 Series User Manual
  1. Manuals
  2. Brands
  3. Garudan Manuals
  4. Sewing Machine
  5. GZ-5527 Series
  6. User manual

Garudan GZ-5527 Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
GZ-5527 series
ANITA B s.r.o.
Průmyslová 2453/7
680 01 Boskovice
Czech Republic
tel: +420 516 454 774
+420 516 453 496
fax: +420 516 452 751
e-mail:
info@anita.cz
MP02700EN_200408

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GZ-5527 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Garudan GZ-5527 Series

Summary of Contents for Garudan GZ-5527 Series

  • Page 1 User Manual GZ-5527 series ANITA B s.r.o. Průmyslová 2453/7 680 01 Boskovice Czech Republic tel: +420 516 454 774 +420 516 453 496 fax: +420 516 452 751 e-mail: info@anita.cz MP02700EN_200408...
  • Page 2 08. 04. 2020 Ing. Kamil Krátký All rights reserved. Property of Anita B s.r.o. and protected by copyright. The use of this content without written consent of Anita B s.r.o. is prohibited. Copyright © Anita B s.r.o. (2020) MP02700EN_200408 GZ-5527 series...

  • Page 3: Table Of Contents

    D10. SETTING OF ZIG-ZAG STITCH WIDTH (THROW) AND POSITION ........18 D11. AUTOMATIC MACHINE CONTROL ................19 D12. KEY CONTROL PANEL ....................20 MACHINE MAINTENANCE ..................21 E1. CLEANING AND CHECKING ..................... 21 E2. LUBRICATION ........................22 MP02700EN_200408 GZ-5527 series...

  • Page 4: Abasic Information

    740 – 840 mm Machine height including thread 1500 – 1600 mm stand Noise level by 50% machine utilization and under standard 73 dB / A conditions Maximal sewing speed 3500 stitches/minute 3200 stitches/minute *with needle 135x17 MP02700EN_200408 GZ-5527 series...

  • Page 5: Bsafety Instruction

    10. Make sure that the power supply and voltage match the requirements on the label of the machine. 11. Do not use the machine in explosive or corrosive environment. 12. In the first two weeks, do not exceed 3/4 of the maximum machine speed. MP02700EN_200408 GZ-5527 series...

  • Page 6: B3. Operational Safety Instruction

    7. Do not work on the machine under the influence of alcohol or drugs. 8. We recommend wearing safety goggles. 9. Do not remove covers or any other safety device while the machine is running. 10. Always turn off the main switch when leaving the machine. MP02700EN_200408 GZ-5527 series...

  • Page 7: B5. Disposal Instructions

    © ANITA B5. DISPOSAL INSTRUCTIONS For disposal of the machine contact your local dealer or manufacturer in accordance with legislation. MP02700EN_200408 GZ-5527 series...

  • Page 8: Cmachine Setup

    When the pedal is kicked down by heel, the machine should stop at “Up” position, i.e. the highest position of take-up lever. „Down“ Position When the pedal is stand at middle position, the machine should stop at “Down” position, i.e. the needle bar raises 3mm from its lowest position. MP02700EN_200408 GZ-5527 series...

  • Page 9: Dmachine Control

    © ANITA D MACHINE CONTROL D1. NEEDLE THREADING Do the threading according to pictures. MP02700EN_200408 GZ-5527 series...

  • Page 10: D2. Wind The Bobbin

    After the bobbin winding, wind the thread round the cutter ② according to second below picture and tear it off by pulling in the arrow direction ③. Fix another bobbin immediately and prepare its winding during the sewing. MP02700EN_200408 GZ-5527 series...

  • Page 11: D3. Bobbin Fixing And Hook Threading

    Insert the case ② back in the hook and press it down in the arrow direction ⑧ till the lock inside the case clicks and secures it against falling out. Make one stitch without the sewn material, and drawing the thread upper end, pull the hook thread end outwards above the throat plate. MP02700EN_200408 GZ-5527 series...

  • Page 12: D4. Thread Tension Adjustment

    (when the tensioner ② is opened - switched off). (The tensioner ① is never switched off). Main tensioner adjustment ②: Regulate the thread tension with the tensioner ② until you achieve a good interlacing of the threads (see below). MP02700EN_200408 GZ-5527 series...
  • Page 13 ③ from the machine, grip it so that the bobbin cannot turn and pull out the thread end ⑧. At a correct adjustment, approx. 10 mm of thread will be pulled out of the case. MP02700EN_200408 GZ-5527 series...

  • Page 14: D5. Needle Replacement

    ③ is oriented according to detail . Tighten the screw ①. • When needle type 134 is used, keep the screw ④ according to figure Ⓑ. • When needle type 134-35 is used, remove the screw ④ according to figure Ⓒ. MP02700EN_200408 GZ-5527 series...

  • Page 15: D6. Foot Lifting

    Automatic foot lifting – by solenoid – using the pedal [applies to GZ-5527-x47] Tread the pedal ③ in position -1 (see section D11). The foot is lifted. Automatic foot lifting after trimming can be pre-selected. The foot is lowered by the pedal ③ treading in position +1. MP02700EN_200408 GZ-5527 series...

  • Page 16: D7. Foot Pressure Setting

    D8. STITCH LENGTH SETTING Turn the knob ① so that the number ② indicating the required stitch length in mm is opposite the screw ③. MP02700EN_200408 GZ-5527 series...

  • Page 17: D9. Backtacking (Reverse Feed, Closing Up)

    At the beginning of the seam (after previous thread trimming) after the pedal treading forwards the machine will sew the pre-selected bar and continue the sewing. At the end of the seam it will sew the pre-selected bar at the pedal treading in position -2. MP02700EN_200408 GZ-5527 series...

  • Page 18: D10. Setting Of Zig-Zag Stitch Width (Throw) And Position

    After the lever ③ setting, carry out arresting with the lever ①. Ⓒ In picture there are examples of setting the zig-zag stitch width and position from which it is visible that the zig-zag stitch width does not change at the position change. MP02700EN_200408 GZ-5527 series...

  • Page 19: D11. Automatic Machine Control

    (down/up) at the seam-stop (by putting the pedal in the neutral position), and for the foot position (down/up) after the seam finishing (by treading the pedal with heel fully backwards and putting the pedal in the neutral position) MP02700EN_200408 GZ-5527 series...

  • Page 20: D12. Key Control Panel

    Hand backtacking. When the key is pressed at sewing, the sewn material is fed backwards. Needle positioning in upper or bottom position By the parameter the key function can be defined 1 = needle up/down 2 = needle up 3 = one stitch (factory setting is 1) MP02700EN_200408 GZ-5527 series...

  • Page 21: Emachine Maintenance

    Check of bobbin case ④ fitting clearance in the hook housing ⑤. Check of drive V-belt tension (checking method is described in the 1 year second part of this Instruction for Use). Lubrication of swinging shafts with grease. MP02700EN_200408 GZ-5527 series...

  • Page 22: E2. Lubrication

    Add oil into tank ③ through the hole ④ at least once a week until the oil starts flowing from the terminal ⑤. Add several drops of oil in holes ⑥ and ⑦ once a month. Grease lubrication ⑨ Add grease in grease cups ⑧ and by means of a lubrication press once a year. MP02700EN_200408 GZ-5527 series...
  • Page 23 © ANITA MP02700EN_200408 GZ-5527 series...
  • Page 25 Spare Parts List GZ-5525, GZ-5527 Series ANITA B s.r.o. Průmyslová 2453/7 680 01 Boskovice Czech Republic tel: +420 516 454 774 +420 516 453 496 fax: +420 516 452 751 e-mail: info@anita.cz MP02700,MP04600_200408...
  • Page 26 08. 04. 2020 Ing. Kamil Krátký All rights reserved. Property of Anita B s.r.o. and protected by copyright. The use of this content without written consent of Anita B s.r.o. is prohibited. Copyright © Anita B s.r.o. (2020) MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...
  • Page 27 K. THREAD TRIMMING PARTS (2/2) ..................42 L. TENSION RELEASE, ELECTROCIRCUIT BOARD, OIL CIRCUIT PARTS (1/2) ......44 L. TENSION RELEASE, ELECTROCIRCUIT BOARD, OIL CIRCUIT PARTS (2/2) ......46 M. AUTOMATIC DRIVE PARTS ....................48 N. ACCESSORIES ........................50 MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...

  • Page 28: Arm Bed And Its Accessories

    © ANITA A. ARM BED AND ITS ACCESSORIES MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...
  • Page 29 Lower thread guide plate screw M3x8 7.02.14.026 Lower thread guide plate 7.02.02.085 Slide plate [GZ-552x-x43] 7.02.02.073 Slide plate 7.02.02.086 Needle plate 7.02.02.079 Needle plate 7.02.11.062 Felt splint 7.02.15.389 Panel screw M5x14 7.02.11.061 Panel 7.01.02.013 Machine frame MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...

  • Page 30: Bobbin Winder And Thread Tension Parts

    © ANITA B. BOBBIN WINDER AND THREAD TENSION PARTS MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...
  • Page 31 Screw 7.02.20.070 Thread winder thread cutter 7.02.15.1031 Thread cutter screw M4x6 7.02.01.213 Thread winder assy. 7.02.15.1087 Thread winder mounting screw M4x12 7.02.08.362 Pin bushing 7.02.10.302 7.02.15.1030 7.02.01.038 Thread tension assy. 7.02.15.006 Screw M4x8 7.02.15.1065 Screw M4x5 MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...

  • Page 32: Arm Shaft And Needle Bar Thread Take-Up Parts (1/2)

    © ANITA C. ARM SHAFT AND NEEDLE BAR THREAD TAKE-UP PARTS (1/2) MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...

  • Page 33: Arm Shaft And Needle Bar Thread Take-Up Parts (2/2)

    Needle bar connection bracket 7.02.15.396 Tighten screw M5x10 7.02.15.397 Needle bar crank tighten screw M6(0.75)x15 7.02.06.035 Needle bar crank 7.02.15.398 Needle bar crank orientation screw M6(0.75)x17.5 7.02.16.090 Felt 7.02.15.399 Arm shaft bushing screw M6x14 7.02.04.024 Arm shaft bearing MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...
  • Page 34 © ANITA C. ARM SHAFT AND NEEDLE BAR THREAD TAKE-UP PARTS (2/2) MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...
  • Page 35 7.02.18.076 Elastic stop ring GB/T893.1-1986- 62 7.02.18.078 Elastic stop ring GB/T894.1-1986- 30 7.02.04.027 Arm shaft bearing (right) 7.02.15.399 Pulley mounting screw M6x14 7.02.07.054 Pulley 7.02.11.064 Pulley cover 7.02.15.432 Pulley cover screw M3x8 7.02.01.211 Tension wheel assy. MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...

  • Page 36: Needle Bar Vibrating Parts I (1/2)

    © ANITA D. NEEDLE BAR VIBRATING PARTS I (1/2) MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...

  • Page 37: Needle Bar Vibrating Parts I (2/2)

    7.02.16.056 Felt 7.02.03.491 Vibrating range shaft Vibrating needle eccentric shaft 7.02.15.426 M6x12 screw 7.02.15.446 Vibrating needle link rod screw M6(0.75)x34 Vibrating needle link rod screw 7.02.15.449 M6(0.75) locking nut Vibrating needle eccentric shaft 7.02.16.065 o-ring (small) MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...
  • Page 38 © ANITA D. NEEDLE BAR VIBRATING PARTS I (2/2) MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...
  • Page 39 © ANITA D. NEEDLE BAR VIBRATING PARTS I (2/2) Ref. No Parts No. Name of parts Description Note 14x 44x Oil wick ø2x80 mm 7.02.10.094 Vibrating needle eccentric shaft 7.02.16.066 O-ring (big) 7.02.08.099 7.02.08.100 7.02.15.427 MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...

  • Page 40: E1. Needle Bar Vibrating Parts Ii [Gz-5527]

    © ANITA E1. NEEDLE BAR VIBRATING PARTS II [GZ-5527] MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...
  • Page 41 7.02.11.593 Stopper plate E1-29 7.02.18.071 Washer E1-30 7.02.15.405 Screw M4x14 E1-31 7.02.15.421 Screw M3x12 E1-32 7.02.05.511 Vibrating needle spanner E1-33 7.02.16.504 Handle E1-34 7.02.15.1082 Nut E1-35 7.02.15.837 Screw E1-36 7.02.05.512 Changing-over spanner E1-37 7.02.15.417 Screw M4x12 MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...

  • Page 42: E2. Needle Bar Vibrating Parts Ii [Gz-5525]

    © ANITA E2. NEEDLE BAR VIBRATING PARTS II [GZ-5525] MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...
  • Page 43 E2-24 7.02.05.103 Link E2-25 7.02.15.1073 Nut E2-26 7.02.18.046 Washer E2-27 7.02.09.038 Fixing collar E2-28 7.02.10.130 Elastic round pin ø2 E2-29 7.02.10.308 Pin screw E2-30 7.02.10.307 ø3 E2-31 7.02.05.516 Lever E2-32 7.02.11.146 Cover plate E2-33 7.02.15.1151 Screw MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...

  • Page 44: Presser Foot Parts (1/2)

    © ANITA F. PRESSER FOOT PARTS (1/2) MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...
  • Page 45 7.02.06.081 Presser foot lifting crank 7.02.15.048 Presser foot lifting crank screw M6x15 7.02.10.146 Presser foot lifting crank pin 7.02.12.081 Slide pole 7.02.18.016 Washer GB/T97.1 5 7.02.15.068 Presser foot lifting crank pin nut GB/T 6170 M5 MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...

  • Page 46: Presser Foot Parts (2/2)

    © ANITA F. PRESSER FOOT PARTS (2/2) MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...
  • Page 47 Knee lifting crank screw M5x12 7.02.05.069 Knee lifting crank 7.02.17.041 7.02.01.04001 Presser foot lifting link lever 7.02.01.04002 Link lever fixed plate 7.02.15.420 Link lever fixed plate screw M4x6 7.02.01.04003 Link lever collar 7.02.01.04004 Nut 7.02.01.04005 Knee lifting connection nut MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...

  • Page 48: Stitch Length Adjustment And Backstitch Parts (1/2)

    © ANITA G. STITCH LENGTH ADJUSTMENT AND BACKSTITCH PARTS (1/2) MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...
  • Page 49 Backstitch connection shaft 7.02.18.028 E-ring ø8 7.02.03.493 Backstitch shaft 7.02.03.077 Backstitch shaft 7.02.01.04204 Orientation pin screw 7.02.01.04203 Orientation pin 7.02.01.04202 Feed backstitch cam bushing 7.02.01.04201 Feed backstitch cam 7.02.04.024 Backstitch cam bearing 7.02.06.039 Backstitch cam crank MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...

  • Page 50: Stitch Length Adjustment And Backstitch Parts (2/2)

    © ANITA G. STITCH LENGTH ADJUSTMENT AND BACKSTITCH PARTS (2/2) MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...
  • Page 51 G. STITCH LENGTH ADJUSTMENT AND BACKSTITCH PARTS (2/2) Ref. No Parts No. Name of parts Description Note 14x 44x 7.02.15.447 Backstitch block tighten screw M4x6 7.02.15.436 Backstitch cam crank screw M5x30 7.02.19.037 Switch 7.02.15.1080 Screw 7.02.07.197 Gear MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...

  • Page 52: Lower Shaft, Feed Dog And Presser Foot Lifting Parts (1/2)

    © ANITA H. LOWER SHAFT, FEED DOG AND PRESSER FOOT LIFTING PARTS (1/2) MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...
  • Page 53 Backstitch cam link lever oil wick ø2x200mm 7.02.10.096 Feed crank pin 7.02.18.082 Bearing washer 7.02.04.029 Backstitch cam link lever bearing 7.02.05.083 Backstitch cam link lever 7.02.18.039 E-ring GB/T896-1986-5 7.02.11.065 Connection plate 7.02.10.095 Lifting feed dog link lever pin MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...

  • Page 54: Lower Shaft, Feed Dog And Presser Foot Lifting Parts (2/2)

    © ANITA H. LOWER SHAFT, FEED DOG AND PRESSER FOOT LIFTING PARTS (2/2) MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...
  • Page 55 Lifting feed dog crank pin oil wick ø2x30mm 7.02.03.494 Lower shaft 7.02.08.107 Lower shaft bearing bushing 7.02.07.198 Synchronous belt 7.02.08.366 Bearing connection bushing 7.02.04.024 Lower shaft bearing 7.02.07.196 Synchronous pulley (lower) 7.02.15.057 Synchronous pulley screw M6x1x8 7.02.09.036 Synchronous pulley isolating ring MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...

  • Page 56: Hook Assembly For Gz-5525-44X And Gz-5527-44X (1/2)

    © ANITA I. HOOK ASSEMBLY FOR GZ-5525-44X AND GZ-5527-44X (1/2) MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...
  • Page 57 Hook thread distributing claw 7.02.10.099 Hook thread distributing bracket Hook thread distributing bracket 7.02.08.110 bushing 7.02.15.440 Bushing tighten screw M6(0.75)x3.5 Hook saddle bottom cover 7.02.18.084 washer 7.02.16.094 Felt 7.02.13.047 Hook saddle bottom cover 7.02.16.075 Hook coppery oil tube MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...

  • Page 58: Hook Assembly For Gz-5525-44X And Gz-5527-44X (2/2)

    © ANITA I. HOOK ASSEMBLY FOR GZ-5525-44X AND GZ-5527-44X (2/2) MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...
  • Page 59 Hook saddle oil box 7.02.15.442 Oil box screw M4x25 7.02.16.451 Oil quantity adjusting valve felt Oil quantity adjusting valve o-ring Oil quantity adjusting valve 7.02.16.069 Oil window cover 7.02.16.071 Oil window cover washer 130.08.612 Brake spring [GZ-552x-x43] MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...

  • Page 60: Hook Assembly For Gz-5525-14X And Gz-5527-14X (1/2)

    © ANITA J. HOOK ASSEMBLY FOR GZ-5525-14X AND GZ-5527-14X (1/2) MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...
  • Page 61 Hook thread distributing bracket 7.02.08.110 bushing 7.02.15.440 Bushing tighten screw M6(0.75)x3.5 7.02.18.084 Hook saddle bottom cover washer 7.02.16.094 Felt 7.02.13.047 Hook saddle bottom cover 7.02.16.075 Hook coppery oil tube Hook oil wick 7.02.15.441 Oil seal screw M6x5 MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...

  • Page 62: Hook Assembly For Gz-5525-14X And Gz-5527-14X (2/2)

    © ANITA J. HOOK ASSEMBLY FOR GZ-5525-14X AND GZ-5527-14X (2/2) MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...
  • Page 63 Coppery oil tube tighten screw M3x4 7.02.13.048 Hook saddle oil box 7.02.15.442 Oil box screw M4x25 7.02.16.451 Oil quantity adjusting valve felt Oil quantity adjusting valve o-ring Oil quantity adjusting valve 7.02.16.069 Oil window cover 7.02.16.071 Oil window cover washer MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...

  • Page 64: Thread Trimming Parts (1/2)

    © ANITA K. THREAD TRIMMING PARTS (1/2) MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...
  • Page 65 Thread trimming link lever bushing 7.02.18.071 Washer 7.02.15.577 Screw M4x12 7.02.15.596 Screw M6x1×6 7.02.12.083 Stopper block Thread trimming electromagnetic 7.02.15.803 Screw M5x10 7.02.13.442 Thread trimming setting bracket Thread trimming setting bracket 7.02.15.058 M5x16 screw 7.02.15.057 Screw M6x1×8 MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...

  • Page 66: Thread Trimming Parts (2/2)

    © ANITA K. THREAD TRIMMING PARTS (2/2) MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...
  • Page 67 Parts No. Name of parts Description Note 14x 44x 7.02.19.038 Thread trimming electromagnetic 7.02.15.1034 Screw 7.02.18.403 Washer 7.02.08.363 Thread trimming bushing 2 7.02.08.364 Thread trimming bushing 1 7.02.03.495 Thread trimming shaft 7.02.17.092 Spring 7.02.06.086 Thread trimming cam MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...

  • Page 68: Tension Release, Electrocircuit Board, Oil Circuit Parts (1/2)

    © ANITA L. TENSION RELEASE, ELECTROCIRCUIT BOARD, OIL CIRCUIT PARTS (1/2) MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...

  • Page 69: Tension Release, Electrocircuit Board, Oil Circuit Parts (2/2)

    Oil tube ø3/ø5x100 mm Oil wick ø2x180 mm Oil tube ø3/ø5x100 mm Oil tube ø3/ø5x200 mm Oil wick ø2x250 mm Oil tube ø3/ø5x130 mm Oil wick ø2x200 mm Oil tube ø3/ø5x320 mm Oil wick ø2x370 mm MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...
  • Page 70 © ANITA L. TENSION RELEASE, ELECTROCIRCUIT BOARD, OIL CIRCUIT PARTS (2/2) MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...
  • Page 71 Name of parts Description Note 14x 44x 7.02.16.073 Coppery oil tube 7.02.16.060 Oil spile Oil tube ø3/ø5x50mm 7.02.16.059 Oil spile 7.02.16.507 Oil box 7.02.16.508 Oil box plug 7.02.15.1080 Screw 7.02.16.091 Felt Oil tube ø3/ø5x600mm Oil wick ø2x640mmx2 MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...

  • Page 72: Automatic Drive Parts

    © ANITA M. AUTOMATIC DRIVE PARTS MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...
  • Page 73 M4x8 7.02.03.510 Upper shaft 7.02.16.520 Switch pad 7.02.16.523 Rear cover 7.02.15.974 Screw M5x55 7.02.15.731 Screw 7.02.19.400 Electric control board 7.02.16.522 Plug 7.02.15.405 Screw M4x14 7.02.11.611 Display plate 7.02.11.610 Face plate 7.02.15.416 Screw M5x12 7.02.15.096 Screw M5x16 MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...

  • Page 74: Accessories

    © ANITA N. ACCESSORIES MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...
  • Page 75 Touch block assy. 7.02.21.556 Touch block 7.02.21.165 Knee lifting orientation block 7.02.21.162 Knee lifting orientation block screw 7.02.21.153 Roller joint Roller joint screw 7.02.21.167 Replacement spring 7.02.21.168 Straight lever 7.02.18.021 E-ring 7.02.21.557 Control system connecting line MP02700,MP04600_200408 GZ-5525, GZ-5527 Series...

This manual is also suitable for:

Gz-5527-143 lmGz-5527-147 lmGz-5527-443 mhGz-5527-447 mhGz-5525 seriesGz-5525-143 lm ... Show all

Table of Contents