Table of Contents
Advertisement
9.0 - Machine Maintenance & Care
WARNING: It is highly recommended that the implement is parked on a hard standing
prior to any maintenance working being undertaken. The implement and tractor
should be secured from restarting. Any lifted components should be lowered or
secured prior to work being undertaken in this area.
9.1 - Cleaning & Lubrication
9.1.1 - Cleaning
Clean the machine thoroughly at regular intervals throughout the sowing season and after the end
of the sowing season.
IMPORTANT: High pressure cleaning jets should not be directed at electrical
components, fan, hydraulic cylinders, or bearings. These components and their
housings are not waterproof under high pressure
The outside of the machine should be cleaned with water.
When using fertiliser components should be cleaned and rinsed thoroughly. Fertilisers are
aggressive and can cause corrosion on your machine
After cleaning with a pressure cleaner, the implement should be lubricated to prolong its life (As
shown in section 9.1.2)
9.1.2 - Lubrication
The machine should be lubricated at regular intervals throughout the sowing season. It is
recommended these coincide with the cleaning schedule to reduce the likelihood of contamination
as well as reducing the risk of corrosion post cleaning
54
|
Advertisement
Table of Contents
