Machine Maintenance & Care; Cleaning & Lubrication; Cleaning - Horizon Fitness DSX 40 Operator's Manual

9.0 - Machine Maintenance & Care
WARNING:It is highly recommended that the implement is parked on a hard standing
prior to any maintenance working being undertaken. The implement and tractor
should be secured from restarting. Any lifted components should be lowered or
secured prior to work being undertaken in this area.
9.1 - Cleaning & Lubrication

9.1.1 - Cleaning

Clean the machine thoroughly at regular intervals throughout the sowing season and after the end
of the sowing season.
IMPORTANT: High pressure cleaning jets should not be directed at electrical
components, fan, hydraulic cylinders, or bearings. These components and their
housings are not waterproof under high pressure
The outside of the machine should be cleaned with water. Sluices under the meter should be
opened so any entered water can flow out.
Inside of the metering unit can be cleaned using compressed air – Wear appropriate PPE as per
manufacturer's instructions as the meter will be contaminated with seed dressings/fertiliser
Coulters, hoppers, and distribution lines can also be cleaned with compressed air – Wear
appropriate PPE as per manufacturers recommendations
When using fertiliser components should be cleaned and rinsed thoroughly. Fertilisers are
aggressive and can cause corrosion on your machine
After cleaning with a pressure cleaner, the implement should be lubricated to prolong its life (As
shown in section 9.1.2)
64 |