Packing Wheel Position - Horizon Fitness SPX Operation Manual

6.3.19 - Packing Wheel Position

The packing wheels can be mechanically locked in the raised position for the following reasons:
• Damp soil conditions.
• Strips do not require any firming.
IMPORTANT: Add a small amount of air pressure (0.25 – 1.0 bars (4 – 14.5 psi)) in the
airbags to prevent the packing wheels from "jumping" during work.
WARNING: Packing wheels are heavy. Users must deflate the airbags prior to
attempting to move them and exercise caution when doing so.
To adjust the Packing wheel position.
1. Deflate the airbags (see section 6.3.1 & 6.3.2).
2. Remove the retaining clip (2).
3. Lift and hold the packing wheel arm (1) up.
4. Remove the retaining pin (3) from the lowered
position (X).
5. Reinsert the retaining pin (3) to the raised
position (Y)
6. Install the retaining clip (2)
7. Set all additional rows to the same position.
| 49