Table of Contents
Advertisement
How To adjust:
1. Turn the lever clockwise to lower the trash wheels.
2. Turn the lever anti-clockwise to raise the trash wheels.
IMPORTANT: It is important that the trash wheels do not operate directly on the
ground as this will create a tillage effect resulting in excessive soil movement and
high component wear rates.
IMPORTANT: When unhooking the air supply line from the vehicle, it is
recommended that the lines are plugged to prevent dirt and debris from entering
the pneumatic system.
To increase the aggressiveness of the row cleaners the control
lever should be moved to the right increasing pressure in the
down gauge increasing the force applied to the row cleaners
To reduce the aggressiveness of the row cleaners the lever
should be moved to the left putting more pressure in the lift
gauge removing force from the row cleaners
To lift the row cleaners out of operation the lever should be
turned all the way to the left. This reduces the force applied
and lifts the row cleaners out of operation.
The required pressures used will depend upon the
row cleaners and field conditions, as such there is no
recommended pressures for the systems operation (So long as
they lie between the system limitations) All rows are operated
at the same pressure.
6.3.6 - Tine
The tine assembly consists of the leg, shank, point and
wing.
Its purpose is to remove any compaction layers, move &
fracture the soil, and to place fertiliser accurately in the
seeding line. Low and high disturbance points, along
with a small and medium wings are available to manage
soil movement.
*Please Note: Berm builder arms and discs have been
removed to provide a clearer view of the tine assembly.
|
39
Advertisement
Table of Contents
