8.2 - Performance Checks
Review the following checks prior to field use:
1. Tractor ballast
2. Tractor tire pressures.
3. Toolbar height to ground & SPX Alignment.
4. Top link length.
5. Lower check chains.
It is recommended that the operator check the implement output and conditions at regular intervals
while in use. To initially configure the machine Horizon Agricultural Machinery Ltd. recommend
drilling a short distance (100m) and ensure the operator is satisifed with the outcome. If adjustments
are required the operator should make the required modifications and perform another small test to
confirm adjustments.
6. Downforce pressure.
7. Trash wheel height.
8. Tine depth and wing setting.
9. Packing wheel pressure.
10. Forward speed.
|
53