6.2 - Wings
WARNING: Actuation of the wings can cause sever crushing injuries and possibly
death. Ensure no personnel are in the danger area and never move under raised
components
WARNING: Machine must only be folded/unfolded on firm and level surfaces. Failure
to do so could cause the machine to roll over due to instability.
CAUTION: Risk of machine damage whilst actuating the wings. Operators must
monitor the wings movement
6.2.1 - Unfolding
Ensure no one is in the danger area of the machine when operating the folding/ Unfolding
actuation
1. Ensure adequate clearance from any obstructions or hazards such as overhead powerlines or
branches and that the danger area is clear of any persons. Please also ensure the frame is lifted
to allow for clearance as the wings articulate
2. Operate service to unfold the implement, whilst ensuring the clearances are maintained and no
users enter the area whilst actuating
6.2.2 - Folding
Ensure no one is in the danger area of the machine when operating the folding/ Unfolding
actuation
1. Ensure adequate clearance from any obstructions or hazards such as overhead powerlines or
branches and that the danger area is clear of any persons. Please also ensure the frame is lifted
to allow for clearance as the wings articulate
2. Operate service to folding the drill, whilst ensuring the clearances are maintained and no users
enter the area whilst actuating
6.3 - Row Unit
There are several systems and components with differing functionality incorporated into the SPX
row unit. Some parts are optional, so not all information contained within this section is relevant to
your machine. This section will however cover the entire SPX row unit.
|
35