Horizon Fitness SPX Operation Manual page 34

DANGER: Accidents can occur with tractor and implement movements. Personnel
should be kept clear of the machines manoeuvres and operators should observe their
surroundings
WARNING: Machine must only be folded/unfolded on firm and level surfaces. Failure
to do so could cause the machine to roll over due to instability.
IMPORTANT: If the machine is being parked for long term storage please see section
9 for cleaning and storage reccomendations prior to parking the implement.
1. Position the machine in a suitable location and secure the tractor with the parking brake.
2. If storing the machine unfolded, unfold the machine completely as shown in chapter 6.2.1
3. Remove the Lynch pins (1) and lower the parking stands. Please ensure the parking stands are
level on both sides of the machine. Reinsert the lynch pins to secure the leg in positions as
shown below.
4. Lower the machine onto the parking stand and row units by lowering the lift arms.
5. Unplug all electrical connections and secure on the machine.
6. Depressurise the hydraulic lines (by activating the "float" function on the tractor spool) and
disconnect hydraulic lines as per section 5.3 securing them on the machine.
7. Depressurise the pneumatic connections and Pneumatic reservoirs such as Brake air reservoir
and Compressor storage tank must be drained of pressure) and secure the connections on the
machine.
8. Unhitch the machine by releasing the top link and lower securing hooks on the lift arms, prior to
lowering the tractor link arms.
9. Manoeuvre the tractor away from the implement
34 |