Decrease Pressure:
1.
Lower the SPX to the ground.
2.
Place the tractor spool in to "float" position.
3.
Slowly open manual valve (1)
4.
Decrease system pressure as measured on the gauge (2) to the desired value.
5.
Close the manual valve once the desired pressure has been established.
6.3.12 - Berm Building Discs
The Berm Discs manage the strip width and structure, by containing the soil brought up from the
subsoil leg & wing.
Toe, width and lateral adjustments can be made to find the optimal set up.
6.3.13 - Berm Discs: Toe Adjustment
Toe-In: Allows the soil to flow easily out of the burm discs. This will create a shallow/ lower strip.
Toe-Out: Slows the soil from passing through the burm discs. This will create a wider/ higher strip.
44
|