6.3.17 - Packing Wheel Type
The SPX can be equipped with 3 differing types of packing wheel to firm the strips, depending upon
soil type, condition, and desired finish.
Finger wheel (STANDARD)
•
The finger type packing
wheel is for usage in heavy
soils and will create a
finished tilth.
6.3.18 - Packing Wheel Pressures
Each row is equipped with a pneumatic air bag to control the closing wheel pressure on the unit.
The closing pressure can be controlled via the supplied box from the tractor cab, or manually with
the fitted schrader valves. See section 6.3.1 and section 6.3.2 for how to adjust the system.
The recommended working range is between 1 and 8 Bar of pressure. 8 Bar is the maximum
pressure for this system. All rows operate at the same pressure when cab controls are fitted.
48
|
2 Rubber Wheels
•
These 2 wheels are utilised
in light soils and leave a
firm finish to aid moisture
retention without over
firming the centre of the
strip
165mm Wide Packing Wheel
•
The wide type packing
wheel is suitable for use on
light soils and will leave a
firm finish to aid moisture
retention.