9. Remove the lynch pins and withdraw the securing pins (1) from the parking stands, raise the
parking stands. Reinserting the securing pin and lynch pin as shown below to lock the parking
stands in the raised position
10. Prior to any machine movements check for secure connections between the implement and
tractor
6.1.2 - Transport Position
DANGER: Failure to correctly configure or secure the implement prior to road
transport can cause a road accident. Hitching elements such be secure and free from
wear, and the implement should be free from mud.
IMPORTANT: Operators must conform to local road traffic regulations and only
transport the implement unladen with no product in the tanks
Prior to any road transport operations the implement should have its wings folded. Prior to
folding the coulters should be raised and locked into the transport position as per section 5.3.
The implement should also be folded up as per section 6.2.2. Once the wings are folded and the
coulters raised the operator should then lower the chassis by operating the chassis lift Hydraulic
service.
6.1.3 - Parking
It is recommended the machine is parked under cover or in a hall. The machine should be parked
in its unfolded state.
DANGER: Severe accidents can be caused by implements movement. Prior to
disconnecting the implement from the tractor. The implement should be lowered
and secure on the parking stands prior to disconnecting the hitch. It is highly
recommended that this is done on a firm level surface (i.e. Hard standings)
|
33