Pump And Tank; Rear Seeding Elements - Horizon Fitness SPX Operation Manual

in the middle of the tube it indicates the optimum flow rate of product. If the ball is suspended
higher, it indicates excessive flow or a possible leak. Visualisation balls are changed depending
upon the Specific gravity of the product being applied. The pressure gauge indicates the optimal
working pressures of the unit (Between 1 and 8 bar)

7.2.2 - Pump and tank

The Control system is wirelessly controlled from a tablet in the Tractor cab and utilises a GPS Speed
sensor for rate control to reduce the wiring required. They can either be mounted on the front
tractor hitch via a 3 Point linkage or incorporated into the implement itself mounted at the rear of
the machine. If the tank is rear mounted on the implement it must be transported empty.
DANGER: Failure road with an empty liquid tank can affect the machines stability.
This can lead to machine damage, accidents, property damage, serious injury or even
death.

7.3 - Rear Seeding Elements

The SPX can be equipped with an integrated seeding element. This allows for the placement of
seed post tillage. The element is equipped with a seed boot and disc to place the seed and a rear
packing wheel for slot closure. Seed placement depth is adjusted using the pin on the rear packing
wheel arm of the element.
The unit itself is available in single and double row configurations, both of which mount onto the
rear packing arm of the SPX Row instead of the packing wheels. The unit has a choice of packing
wheels available for firm the tilled strip prior to seed placement & for closure of the slot post drilling.
Each element is also equipped with spacers to adjust the placement of the product relative to the
slot itself.
| 51