Pump And Tank; Hydraulic Oil Cooler - Horizon Fitness DSX 40 Operator's Manual

7.5.3 - Pump and tank

The Control system is wirelessly controlled from a tablet in the Tractor cab and utilises a GPS Speed
sensor for rate control to reduce the wiring required. They can either be mounted on the front
tractor hitch via a 3 Point linkage or incorporated into the implement itself mounted at the rear of
the machine. If the tank is rear mounted on the implement it must be transported empty.
DANGER: Failure road with an empty liquid tank can affect the machines stability.
This can lead to machine damage, accidents, property damage, serious injury or
even death.

7.6 - Hydraulic Oil Cooler

CAUTION: Risk of burns on the fan drive system. Hydraulic components can
become hot during operation.
62 |
The DSX can be equipped with an optional oil
cooler the cooler attaches to the fan housing as
shown below.
To ensure the cooling capacity of the cooler, clean
the spaces between the fins daily with compressed
air. With intensive usage (Soiling) the cooler may
need to be cleaned several times a day. Please
also note that the intake should be cleaned of
any debris also to ensure adequate air intake and
cooling capacity.