Transport Position - Horizon Fitness DSX 40 Operator's Manual

7. Remove the Lynch pin and withdraw the securing pin from the parking stand then raise the
parking stand. Reinserting the Securing pin and lynch pin as shown overleaf to lock the parking
stand in the raised position
8. Remove wheel chocks from beneath the wheels.
9. Release parking brake by rotating the handle clockwise. For further details see section 6.1.
10. The pneumatic braking system on the DSX includes an emergency valve as such once the
pneumatic lines are securely connected or the drill becomes detached from the tractor the
brakes will be applied. On hydraulically braked implements there is a separate valve that
required connection prior to movements attach the cable to the rear of the tractor. Please
ensure that the valve is only actuated in an emergency and not actuated by the pin being
removed in normal operation. For further details refer to section 6.1.4
11. Prior to any machine movements check for secure connections between the implement and
tractor

6.1.2 - Transport Position

DANGER: Failure to correctly configure or secure the implement prior to road
transport can cause a road accident. Coulters must be raised and locked as shown
below. Parking brakes should be released and the implements braking functionality
checked and hitching elements such be secure and free from wear
IMPORTANT: Operators must conform to local road traffic regulations and only
transport the implement unladen with no product in the tanks
Prior to any road transport operations the drill should have its chassis lowered to ensure machine
stability and its wings folded. Prior to folding the coulters should be raised and locked into the
transport position as per section 5.3. The implement should also be folded up as per section 6.2.2.
Once the wings are folded and the coulters raised the operator should then lower the chassis by
operating the chassis lift Hydraulic service.
32 |