Remote Device Management (Rdm) - Elation KL PROFILE FC KLP412 User Manual

R E M O T E D E V I C E M A N A G E M E N T ( R D M )
NOTE: In order for RDM to work properly, RDM enabled equipment must be used through-
out the entire system, including DMX data splitters and wireless systems.
Remote Device Management (RDM) is a protocol that sits on top of the DMX512 data stan-
dard for lighting, allowing the DMX systems of the fixtures to be modified and monitored
remotely. This proto-col is ideal for instances in which a unit is installed in a location that is
not easily accessible.
With RDM, the DMX512 system becomes bi-directional, allowing a compatible RDM enabled
con-troller to send out a signal to devices on the wire, as well as allowing the fixture to
respond (known as a GET command). The controller can then use its SET command to modify
settings that would typically have to be changed or viewed directly via the unit's display
screen, including the DMX Address, DMX Channel Mode, and Temperature Sensors.
FIXTURE RDM INFORMATION:
RDM Code
0x22A6
Please be aware that not all RDM devices support all RDM features, and therefore it is im-
portant to check beforehand to ensure that the equipment that you are considering includes
all of the fea-tures that you require.
The following parameters are accessible in RDM on this device:
[0x0200] Sensor Definition
[0x0201] Sensor Value
[0x0080] Device Model Description
[0x0081] Manufacturer Label
[0x0082] Device Label
[0x00E0] DMX Personality
[0x00E1] DMX Personality Description [0x0121] Slot Description
[0x0400] Device Hours
[0x0015] Comms Status
[0x0031] Status ID Description
[0x0032] Clear Status ID
[0x0405] Device Power Cycles
[0x0600] Pan Invert
[0x0601] Tilt Invert
[0x0602] Pan Tilt Swap
Device ID Device Model ID Personality ID
0029
23
001: Standard
002: Extend
41
003: CMY Standard
004: CMY Extended
[0x0500] Display Invert
[0x0501] Display Level
[0x0603] Realtime Clock
[0x1010] Power State
[0x1031] Preset Playback
[0x0120] Slot Information
[0x0122] Default Slot Value
[0x00B0] Language
[0x00A0] Language Capabilites
[0x00C2] Boot Software Version Label
[0x00C1] Boot Software Version ID
[0x0070] Product Detail ID List
[0x0030] Status Messages