Remote Device Management (Rdm) - Elation KL CYC L User Manual

R E M O T E D E V I C E M A N A G E M E N T ( R D M )
NOTE: In order for RDM to work properly, RDM enabled equipment must be used
throughout the entire system, including DMX data splitters and wireless systems.
Remote Device Management (RDM) is a protocol that sits on top of the DMX512 data
standard for lighting, allowing the DMX systems of the device to be managed, modified,
and monitored remotely (hence, remote device management). This protocol is ideal for
fixtures installed in locations that are not easily accessible.
With RDM, the DMX512 system becomes bi-directional, allowing a compatible RDM
enabled controller to send out a signal to devices on the wire, as well as allowing
the fixture to respond (known as a GET command). The controller can then use it's
SET command to modify settings that would typically have to be changed or viewed
directly via the unit's display screen, including the DMX Address, DMX Channel Mode,
and Temperature Sensors.
FIXTURE RDM INFORMATION:
RDM Code
0x22A6
Please be aware that not all RDM devices support all RDM features, and therefore it
is important to check beforehand to ensure that the equipment that you are considering
includes all of the features that you require.
The following parameters are accessible in RDM on this device:
[0x0011] Proxied Device Count
[0x0200] Sensor Definition
[0x0201] Sensor Value
[0x0080] Device Model Description
[0x0081] Manufacturer Label
[0x0082] Device Label
[0x00E0] DMX Personality
[0x00E1] DMX Personality Description
[0x0400] Device Hours
[0x0015] Comms Status
[0x0031] Status ID Description
[0x0032] Clear Status ID
Device ID Device Model ID
0000-FFFF
1CH Dimmer
4CH RGB
4CH CCT
4CH HSI
12CH HSI Extended
11CH CMY
0X004C 16CH CMY Extended
13CH Standard
20CH Extended
19CH Standard 2 Zone
32CH Extended 2 Zone
31CH Standard 4 Zone
56CH Extended 4 Zone
[0x0405] Device Power Cycles
[0x0500] Display Invert
[0x0603] Realtime Clock
[0x0122] Default Slot Value
[0x00B0] Language
[0x00A0] Language Capabilities
[0x00C2] Boot Software Version Label
[0x00C1] Boot Software Version ID
[0x0070] Product Detail ID List
[0x0030] Status Messages
[0x0000] Undefined PID [0x1100, (4352)]
18
Personality ID