Elation KL PROFILE FC KLP412 User Manual page 12

Table of Contents

I N S TA L L AT I O N I N S T R U C T I O N S

OMEGA BRACKETS: Insert a bolt of appropriate size and rating for the desired clamp through hole of

mounting clamp, then insert the bolt into the center hole of your omega bracket. The bolt should pass

through both the clamp and the omega bracket. Thread a matching washer and locking nut onto the bolt

shaft protruding from the underside of the omega bracket.

Now insert the omega bracket into the outer holes on top of the yoke. Secure them by turning each

quick-lock fastener ¼-turn clockwise, making sure the fasteners are completely locked.

SAFETY CABLE: The fixture provides a built-in rigging points for a Safety Cable (not included) on the

side of the fixture near the base of the yoke. Be sure to only use the designated rigging point for the

safety cable, and never secure a safety cable to a carrying handle.

MOUNTING

CLAMP

OMEGA

BRACKET

SAFETY CABLE:

ALWAYS ATTACH A SAFETY CABLE

WHENEVER INSTALLING THIS

FIXTURE IN A SUSPENDED ENVI-

RONMENT TO ENSURE THAT THE

FIXTURE WILL NOT FALL IF THE

CLAMP FAILS. ONLY USE DESIG-

NATED RIGGING POINTS FOR SAFE-

TY CABLE, AND NEVER ATTACH

A SAFELY CABLE TO A CARRYING

HANDLE.

SAFETY

CABLE

LOOP

Table of Contents