Framing Operation - Elation KL PROFILE FC KLP412 User Manual

F R A M I N G O P E R AT I O N
The KL Profile FC features four adjustable framing blades.
Set the Zoom angle using the knob on the right side of the fixture (when fixture is oriented
upright and viewed from the back) to adjust the light beam to the desired size. It is always
ideal to use the smallest possible zoom angle to achieve the greatest light output from the
fixture. Once the zoom position has been set to project the desired size of the light beam,
the frames can be used to create straight edges.
Insert the frames to shape the light beam as desired. Angle the frames left and right to cre-
ate the desired shape. Moreover, the barrel can be adjusted to rotate the entire shape at
once to achieve the desired orientation. See the Barrel Rotation section of this manual for
detailed information.
The sharpness of the frame can be adjusted using the Focus Knob on the left side of the fix-
ture (when the fixture is held upright and viewed from the back).
Framing
Adjustment
Controls
(4th control
located on
underside)
Zoom
Adjustment
Knob
20