Hold/Resume A Call; To Hold/Resume A Call; Using A Headset To Make And Receive Calls; To Make Calls With Your Headset - NEC DT900 Series User Manual

Figure 6.2

To hold/resume a call

1
2

To make calls with your headset

1
2
3
4
5
6-64
B A S I C C A L L O P E R AT I O N
Redial from Cursor Pad
H O L D / R E S U M E A C A L L
While on a call, press the Hold key to place the call on hold.
If the SIP server supports music-on-hold, the other party hears music-on-hold.
To resume the held call, press the Hold key, or press the Resume softkey.
• On hold duration is displayed in MM:SS format for the first hour, and then HH:MM
for the remainder of the call. The maximum duration is 99:59:59.
During a held call, you can dial another party by pressing the NewCall softkey,
Note:
which provides dial tone.
If you have problems reconnecting to a call after it is put on hold, press the EndCall
softkey to terminate the call.
U S I N G A H E A D S E T T O M A K E A N D R E C E I V E C A L L S
If you have a headset attached to your phone and your phone is configured for the
headset, you can either use the telephone handset or your headset when you make
and receive calls.
If you are using a headset, it is assumed that the telephone handset in the on-hook
position when you are making calls.
Press the NewCall softkey to receive dial tone.
Enter the telephone number.
Press the Dial softkey to initiate the call, or wait a few seconds for the call to be
automatically dialed.
You can also dial the number, then press the Headset softkey to initiate a call.
Note:
A Headset icon displays on the LCD along with the call information.
If you want to transfer the call to your telephone handset, pick up the telephone handset
to continue the call. If you want to transfer back to the headset, press the
Headset softkey, then place the telephone handset back on-hook.
While you are on a call, if you press the Headset softkey while the telephone
Note:
handset is on-hook, your call will be dropped. Make sure you pick up the
telephone handset to continue your call before you press the Headset softkey.
DT900/DT900S Series Phone User Guide