To Select An External Ringtone; To Enable An External Headset - NEC DT900 Series User Manual

To select an external ringtone

1
2
3
4

To enable an external headset

1
4-40
B A S I C S E T U P W I T H T H E M E N U S A N D C U R S O R PA D
The phone only plays the ringtone if it is in the idle state. If the phone receives
Note:
an incoming call or event related to a soft ring, when it is playing this ringtone,
it stops playing the ringtone and plays the ringtone currently configured for the
received event.
To stop playing a ringtone and listen to another ringtone, use the
scroll to another ringtone.
To select a new ringtone, scroll to the ringotne or press the number for that ringtone,
then press the OK soft key or the ENTER key
ringtone will be applied to your next incoming call.
To exit the menu without making any changes to your current ringtone, press the
Cancel soft key.
If a ringtone label shows a "*" character at the end of the file name, the file is
Note:
specified in your phone configuration file, but the file itself could not be
downloaded from the boot server. If you select this entry, it will not be saved
and your ringtone settings will not change.
Press the Menu key.
3
Select User Settings.
1
Select Ringtone.
2
Select External Ringtone.
By default, your current external ringtone is selected.
 
Use the and keys to scroll through the list of ringtones, or use the phone keypad
to select a specific ringtone.
To listen to the ringtone, scroll to that selection. A single loop sample of the ringtone is
played.
The phone only plays the ringtone if it is in the idle state. If the phone receives
Note:
an incoming call or event related to a soft ring, when it is playing this ringtone,
it stops playing the ringtone and plays the ringtone currently configure for the
received event.
To stop playing a ringtone and listen to another ringtone, use the
scroll to another ringtone, or use the phone keypad to select a specific ringtone.
To select a new ringtone, scroll to the ringotne or press the number for that ringtone,
then press the OK soft key or the ENTER key
ringtone will be applied to your next incoming call.
To exit the menu without making any changes to your current ringtone, press the
Cancel soft key.
If a ringtone label shows a "*" character at the end of the file name, the file is
Note:
specified in your phone configuration file, but the file itself could not be
downloaded from the boot server. If you select this entry, it will not be saved
and your ringtone settings will not change.
Connect the headset to the phone:
Insert the headset cord plug into the HEADSET connector on the back of the phone,
a.
until you hear a click.

and
b
. If you select a new ringtone, this

and
b
. If you select a new ringtone, this
DT900/DT900S Series Phone User Guide

keys to

keys to