To Set Forwarding For Your Phone; To Disable Forwarding For Your Phone - NEC DT900 Series User Manual

To set Forwarding for your phone

1
2

To disable Forwarding for your phone

1
2
DT900/DT900S Series Phone User Guide
Call Control
LED
Home Screen
Red
While the LED for the Forwarding key is not lit
The Handset Forwarding page from the phone microbrowser is opened.
Use the phone keypad and the microbrowser soft keys to configure the handset
forwarding conditions for your phone.
While the LED for the Forwarding key is red
The Handset Call Forwarding page from the phone microbrowser is opened.
Select Clear forwarding.
The phone clears your handset forwarding settings.
When Forwarding is disabled, the phone may continue to play the stutter dial
Note:
tone (if configured on your system) depending on the state of Message
Waiting Indicator (MWI) and Call Forwarding features.
E N H A N C E D P R O G R A M M A B L E K E Y S
Comments
No Answer Handset Forwarding is enabled.
Note: Handset Forwarding may have been enabled through the
Forwarding key, through the star codes, or using a supported
client application.
, press the Forwarding key.
, press the Forwarding key.
8 -127