Monitor Presence Icons - NEC DT900 Series User Manual

6
Table 7.1
7-76
S P E E D D I A L A N D P R O G R A M M A B L E K E Y S
specific phone models, see "Speed Dial Key Numbering" in the user guide for your
phone.
Select the monitor settings for this speed dial, then press Enter
the OK softkey.
Monitoring can only be done on other lines that are internal to your system.
Note:
You cannot monitor external or outside lines.
Valid options for monitoring are:
1
• None - Do not monitor presence state changes for this Speed Dial Key
2
• Visual - Presence state is shown visually using the LED on the Speed Dial Key,
and a Presence icon is shown in the Personal Directory.
3
• Visual and Soft Ring - Presence state is shown visually using the LED on the
Speed Dial Key, and a Presence icon is shown in the Personal Directory. When a
call is ringing on the monitored terminal, play a soft ring tone.
3
Option Visual and Soft Ring is only valid for SIP@Net platforms. Contact
Note:
your system administrator to determine if Soft Ring is available on your
system.
If you have Visual Monitor Settings for an entry in the Directory that also has an
assigned Speed Dial, the presence (Available, Busy or Offline) of the line is shown in
the Directory.

Monitor Presence Icons

Type
Line Key Registered
Unregistered
Speed Dial Key Not Available
(No Monitoring)
BLF Idle
Ringing (SIP@Net)
Ringing (3C system)
Subscription Failed
Online (3C system)
(Phone is Online)
On the Phone
(Phone is in use)
Held (3C system)
Busy
Status Icon
b
on the cursor pad or
DT900/DT900S Series Phone User Guide